HP ProLiant DL740 Server - Manual (Page 228)

Regulatory Compliance Notices
Power Cords
The power cord set included in the server meets the requirements for use in the
country where you purchased the server. If you need to use this server in another
country, you should purchase a power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked
on the electrical ratings label. The voltage and current rating of the cord should be
greater than the voltage and current rating marked on the product. In addition, the
diameter of the conductors must be a minimum of 1.50 mm
2 or 16AWG, and the
length of the cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). If you have
questions about the type of power cord to use, contact your HP authorized service
provider.
A power cord should be routed so that it is not likely to be walked on or pinched by
items placed upon it or against it. Particular attention should be paid to the plug,
electrical outlet, and the point where the cord exits from the product.
A-6 HP ProLiant DL740 Server User Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: k-appa Regulatory Compliance Notices.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:34 PM