HP ProLiant DL740 Server - Manual (Page 227)

Regulatory Compliance Notices
Laser Devices
All HP systems equipped with a laser device comply with safety standards, including
International Electrotechnical Commission (IEC) 825. With specific regard to the
laser, the equipment complies with laser product performance standards set by
government agencies as a Class 1 laser product. The product does not emit hazardous
light; the beam is totally enclosed during all modes of customer operation and
maintenance.
Laser Safety Warnings
WARNING: To reduce the risk of exposure to hazardous radiation:
• Do not try to open the laser device enclosure. There are no
user-serviceable components inside.
• Do not operate controls, make adjustments, or perform procedures on the
laser device other than those specified herein.
• Allow only HP authorized service technicians to repair the laser device.
Compliance with CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.
Compliance with International Regulations
All HP systems equipped with laser devices comply with appropriate safety
standards, including IEC 825.
HP ProLiant DL740 Server User Guide A-5
HP CONFIDENTIAL
Writer: Anna Roberts File Name: k-appa Regulatory Compliance Notices.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:34 PM