HP ProLiant DL740 Server - Manual (Page 221)

Software Management
The first time the ACU is run, if you have not already set up your Web agent
password, ACU will launch an applet for setting up your passwords. You must have
an administrator password set up to run ACU as a service.
To access ACU with a Web browser:
1. On either the ProLiant DL740 server or a client PC, launch your preferred Web
browser.
2. Enter the address of the computer you wish to configure:
— If you are using local access, you must enter the loop-back address:
http://127.0.0.1:2301
— If you are using remote access, enter:
http://computer:2301
where computer is either the IP address or the name (under DNS) of the
system you want to manage.
After you enter the address, the Device Home Page is displayed.
NOTE: The :2301 in the URL is the port or socket number that ACU uses to
communicate with the browser. If this number is not specified, your browser might attempt
to connect to another Web page if the host server is running a Web server.
The Device Home Page is the first page displayed when you access the device at
port 2301. This page displays available HP Web-enabled services. To use ACU, you
must log on as administrator. To log on as administrator:
1. Click the Login link to access the Account Login screen.
2. In the User field, select administrator.
3. In the Password field, enter your administrator password.
4. Click OK to return to the Device Home Page.
IMPORTANT: You must configure your Web browser, enabling JavaScript for ACU to work
properly.
9-16 HP ProLiant DL740 Server User Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: j-ch9 Software Management.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:25 PM
The Device Home Page contains the following links:
• Array Configuration Utility—Accesses ACU.