HP ProLiant DL740 Server - Manual (Page 74)

Server Access
7. Push in on the sides of the module release levers (1) on the host module and
rotate the top of the levers downward (2), as shown in Figure 3-4.
8. Pull the host module out of the chassis (3).
Figure 3-4: Releasing the host module
9. Set the host module aside for servicing non-hot-plug components.
WARNING: To reduce the risk of personal injury from hot surfaces, allow
the internal system components to cool before touching them.
10. To view the top panel labels, pull the chassis out of the rack until the chassis
makes contact with the rail stop.
NOTE: The top panel labels provide instructions about installing expansion boards,
setting switches, and installing hot-plug fans, along with information about PCI Hot Plug.
Refer to Chapter 5 for hot-plug procedures.
HP ProLiant DL740 Server User Guide 3-7
HP CONFIDENTIAL
Writer: Anna Roberts File Name: d-ch3 Server Access.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:04 PM