HP Designjet T1300 ePrinter User Manual
HP Printers
This manual is related to the following products:
Table of contents
Document Outline
- Introduction
- Installing the software
- Choose which connection method to use
- Connect the printer to your network
- Connect a computer to the printer by network (Windows)
- Connect a computer to the printer by USB cable (Windows)
- Uninstall the printer software (Windows)
- Connect a computer to the printer by network (Mac OS)
- Connect a computer to the printer by USB cable (Mac OS)
- Uninstall the printer software (Mac OS)
- Setting up the printer
- Introduction
- Set up your Web-connected printer
- Web Services manual configuration
- Paper suitability options (T1300 series)
- Turn nesting on and off (T1300 series)
- Turn usage information on and off
- Turn e-mail notifications on and off
- Turn alerts on and off (Windows only)
- Control access to the printer
- Require account ID (T1300 series)
- Set Windows driver preferences
- Personalizing the printer
- Change the language of the front-panel display
- Access the HP Utility
- Access the Embedded Web Server
- Change the language of the HP Utility
- Change the language of the Embedded Web Server
- Change the sleep mode setting
- Turn the buzzer on and off
- Change the front-panel display brightness
- Change the units of measurement
- Configure network settings
- Change the graphic language setting
- Manage ePrinter security
- Change your printer’s email address
- Paper handling
- Working with two rolls (T1300 series)
- Printing
- Introduction
- Print from a USB flash drive
- Print from a computer using the Embedded Web Server or HP Utility (T1300 series)
- Print from a computer using a printer driver
- Advanced print settings
- Select print quality
- Select paper size
- Select margins options
- Print on loaded paper
- Rescale a print
- Change the treatment of overlapping lines
- Preview a print
- Print a draft
- High-quality printing
- Print in gray shades
- Print with no margins (T1300 series)
- Print with crop lines (T1300 series)
- Use paper economically
- Nest jobs to save roll paper (T1300 series)
- Use ink economically
- Roll protection (T1300 series)
- Unattended printing/overnight printing (T1300 series)
- Web-connected printing
- Print remotely with HP Designjet ePrint & Share
- Print by email
- Print from a smartphone or tablet
- View and print from the HP Designjet ePrint & Share website
- Print from HP Designjet ePrint & Share using the printer’s front panel
- View and print from other content repositories
- Create your Online Print History
- Share files in your Online Print History
- HP Designjet ePrint & Share security
- Job queue management (T790 PS and T1300 series)
- Color management
- Practical printing examples
- Retrieving printer usage information
- Handling ink cartridges and printheads
- Maintaining the printer
- Accessories
- Troubleshooting paper issues
- The paper cannot be loaded successfully
- The paper type is not in the driver
- The printer printed on the wrong paper type
- An “on hold for paper” message (T1300 series)
- Which criteria are used to decide on which roll a job will be printed?
- When is a job put on hold for paper?
- If I load a new roll of paper, will jobs that were on hold for paper be automatically printed?
- I don’t like jobs being put on hold for paper. Can I prevent it?
- I set the option “Paper mismatch action” to Print anyway, but some jobs are still put on hold
- My job is exactly as wide as the roll of paper that is loaded on the printer, but is put on hold for ...
- The roll paper will not advance
- The paper has jammed
- A strip stays on the output tray and generates jams
- The printer displays out of paper when paper is available
- Prints do not fall neatly into the basket
- The sheet stays in the printer when the print has been completed
- The paper is cut when the print has been completed
- The cutter does not cut well
- The roll is loose on the spindle
- Recalibrate the paper advance
- Troubleshooting print-quality issues
- General advice
- Print quality troubleshooting wizard
- Horizontal lines across the image (banding)
- Lines are too thick, too thin or missing
- Lines appear stepped or jagged
- Lines print double or in the wrong colors
- Lines are discontinuous
- Lines are blurred
- Line lengths are inaccurate
- The whole image is blurry or grainy
- The paper is not flat
- The print is scuffed or scratched
- Ink marks on the paper
- Black ink comes off when you touch the print
- Edges of objects are stepped or not sharp
- Edges of objects are darker than expected
- Horizontal lines at the end of a cut sheet print
- Vertical lines of different colors
- White spots on the print
- Colors are inaccurate
- Colors are fading
- The image is incomplete (clipped at the bottom)
- The image is clipped
- Some objects are missing from the printed image
- A PDF file is clipped or objects are missing
- The Image Diagnostics Print
- If you still have a problem
- Troubleshooting ink cartridge and printhead issues
- Troubleshooting general printer issues
- Front-panel error messages
- HP Customer Care
- Printer specifications
- Glossary
- Index