HP Designjet T1300 ePrinter - Manual (Page 104)

Color management from the front panel
You can color-calibrate the loaded paper type from the front panel by pressing , then , then
Image quality maintenance > Calibrate color. See Color calibration on page 86 .
The other color options in the front panel can all be found by pressing , then , then Setup >
Printing preferences > Color options.
NOTE: These front panel settings can all be overridden by the printer driver or (with the T1300
series) Embedded Web Server job submission settings.
T790 series and T1300 series options
● Color/Grayscale: you can choose to print in color or in shades of gray. Default: Print in
color.
● Select RGB source profile: you can choose from a selection of RGB source profiles recognized
by the printer. Default: sRGB (HP).
● Emulate printer: you can choose to emulate a different HP Designjet printer. Default: Off (no
printer emulation).
TIP: If you have old HP-GL/2 or PostScript files made for a different HP Designjet printer, you
can send them to the printer and use the front panel to turn on the appropriate emulation mode.
T1300 PS options (with PostScript or PDF jobs)
● Select CMYK source profile: you can choose from a selection of CMYK source profiles
recognized by the printer. Default: US Coated SWOP v2.
● Select rendering intent: you can select the rendering intent. Default: Perceptual.
96 Chapter 10 Color management ENWW