HP Storage Mirroring V4.5 Software - Manual (Page 44)

4 - 3
3. After you select a like-named cluster for the target, you will need to configure the like-named
cluster. After you select the target server, the Like-named cluster setup dialog box will appear.
4. Enter the following information:

Target Cluster—Enter the name of one of the target nodes, then click Connect.

Network—Select the NIC to which you will assign the IP address.

IP Address (to create)—Enter a new IP address for the target to use when it stands in for
the source.

Subnet Mask—Enter the subnet mask to use for the new IP address.

Storage Resources—The Application Manager will automatically select the required storage
resources on the target, provided that they exist (for example, if the source and target both
have
E:\
and
S:\
). Verify that the drive letters where Exchange data is located are selected.
5. When you are finished, click OK to return to the Manage Exchange window.
NOTE:

You can not de-select a storage resource that exists on both the source and
target.

If the drive letters on the source and target do not match, then not all required
data will be selected automatically. You will need to select it manually. The
selected storage resources must be in the same group.