HP StorageWorks 8000 NAS - Manual (Page 72)

70 Configuring Your System and Network
Configuring Alert Settings
Defining SNMP Alerts
If you are using a network management product such as HP OpenView, CA
Unicenter, or Tivoli Network Node Manager, you can define the names of
management workstations to receive notification in case of a failure. For more
information about these products, see the HP Surestore Enterprise Integrations
Installation and User Guide at http://www.hp.com/support/emsp.
Note The information on this screen is optional. Blank fields do not
affect the functionality of the device. In the event of a hardware
failure or system alert, messages are sent through SMTP (email),
or they are logged in the system log.
To define the management servers to notify:
1 In the Command View NAS web interface, click the Configuration tab.
2 Navigate down the tree to Alerts/Logging, then select SNMP Alerts.
3 Select Actions > Edit SNMP Settings.
4 Enter the SNMP password required for network management tools to
retrieve operational or configuration information from the device in the
SNMP Community String field.
5 Enter the name or IP address of the server you want the system to notify in
the SNMP Trap Destinations field.
6 Click OK.
To edit the Trap Destinations, click Actions > Edit SNMP settings, then:
■ Click the incorrect entry to modify it.
■ Click the entry and click the delete icon to remove it.
Click OK to apply each change.
See Appendix B, SNMP Trap Definitions for a list of the traps sent by the NAS
server.