HP StorageWorks 8000 NAS - Manual (Page 60)

58 Configuring Your System and Network
Setting the Domain Name Service (DNS)
Domain Name Servers convert system names that people can remember (such
as nas8000.fc.hp.com) to IP addresses (such as 123.45.67.89) that are used
by packet-routing software.
To enter the DNS information:
1 In the Command View NAS web interface, click the Configuration tab.
2 Navigate down the tree to TCP/IP > DNS.
3 Select Actions > Edit DNS Values.
4 If required, enter the DNS Domain Name. The NAS server can belong to
only one domain.
5 Enter DNS IP Addresses, pressing Enter after each address (up to a
maximum of three). You can enter them in the appropriate search order
(that is, enter the IP address of the Primary DNS first, followed by the IP
address of the secondary DNS, and so on until all of your Domain Name
Servers are identified) or rearrange them afterward using the up and
down arrow buttons.
6 Click OK.
To edit the DNS information, click Actions > Edit DNS Values, then:
■ Click the incorrect entry to modify it.
■ Click the entry and click the delete icon to remove it.
Click OK to apply each change.