HP StorageWorks 8000 NAS - Manual (Page 123)

Monitoring the System 121
M
onit
ori
ng
th
e Sys
tem
Monitoring Components
Viewing Memory Status
You can view the status of the memory modules installed in the NAS server.
This page displays the total memory installed and the total number of memory
slots on your NAS server.
To view the memory status:
1 In the Command View NAS web interface, click the Status tab.
2 Navigate down the tree to Components, then and select Memory.
3 A table displays the:
— Memory Slot: The number of the memory slot
— Memory Size: The size in MB of the memory module
— Memory Status: The state of the memory
Events that are listed on this page are also listed in the hardware event log
and the system log.
This page lets you:
■ Change the refresh rate for the displayed information by choosing a time
interval from the drop-down list.
■ Click on a column heading to sort items in that column.
Viewing Power Supply Status
The NAS server monitors the installed power supplies. If a power supply
sends an alert indicating that a failure is pending, the power supply status
shows critical.
To monitor the status of the batteries in the NVRAM memory module in the
attached storage array, you need to launch the Command View SDM web
interface.
To view power supply status:
1 In the Command View NAS web interface, click the Status tab.
2 Navigate down the tree to Components, then select Power Supplies.