HP StorageWorks 8000 NAS - Manual (Page 146)

144 Enabling Virus and Backup Software
software on the NAS server. For details how to import an Omniback II
client into a cell, see the HP OpenView OmniBack II Installation and
Licensing Guide .
Configuring a Backup Device
1 Select Devices & Media from the drop-down list, then select Devices from
the tree. Right click, and select Add Device or Autoconfigure Devices.
2 Type a Device Name and Description and change the Device Type to
SCSI II Library. Click Next.
3 In the SCSI address of filename of the Library robotic drop-down list,
select the tape library and click Next.
4 The next screen displays available slots when connected to a HP Tape
Library. Click Add, then click Next.
5 Select the media type for the tape library from the drop-down list, then
click Finish.
6 You have now successfully configured the library. Click Yes to configure
the drives.
Configuring the Tape Drives
1 In the dialog that appears, type a Device Name and Description, then
click Next.
2 Look to see what Drive Index is noted in the field. Select the SCSI Address
or filename of Data Drives from the drop-down list that matches the Drive
Index. Repeat this step for all the drives.
3 Select the appropriate mediapool.
4 Click Finish.
For details how to configure backup devices within OmniBack II, see the HP
OpenView OmniBack II Administrator's Guide .