HP StorageWorks 8000 NAS - Manual (Page 121)

Monitoring the System 119
M
onit
ori
ng
th
e Sys
tem
Monitoring the Environment
Viewing Temperature Status
This page gives the current temperature values in various locations:
■ All CPUs
■ System board
■ Backplane
The screen displays temperatures in degrees Celsius. The status symbol
indicates the state of the temperature.
A critical reading indicates that the temperature has gone outside the
acceptable specified range. Make sure that all fans are properly installed and
functioning.
Events that are listed on this page are also listed in the hardware event log
and the system log.
To view the system temperatures:
1 In the Command View NAS web interface, click the Status tab.
2 Navigate down the tree to Environment, then select Temperature.
This page lets you:
■ Change the refresh rate for the displayed information by choosing a time
interval from the drop-down list.
■ Click on a column heading to sort items in that column.
Viewing System Voltage Status
The system voltage status page provides information on the status of:
■ System voltage
■ Sensor location
■ Current system voltage readings
Events that are listed on this page are also listed in the hardware event log
and the system log.
To view the system voltage:
1 In the Command View NAS web interface, click the Status tab.
2 Navigate down the tree to Environment, then select System Voltage.