HP StorageWorks 8000 NAS - Manual (Page 62)

60 Configuring Your System and Network
For more information about concepts related to this material, see
“Understanding High Availability” on page 24.
4. Configure the node You can now complete the balance of the node configuration
on each node. The cluster can be either up or down. A defined
cluster allows subsequent node configuration to be
synchronized between the nodes (assuming that they are
available on the network).
5. Configure the storage 1 Create volume groups. (See “Creating a Volume Group” on
page 82.)
2 Assign volume groups to packages and start packages to
activate volume groups. (See “Adding a New Package” on
page 86.)
Create file volumes and shares on the active volume groups.
(See “Creating a New File Volume” on page 92 and “Creating
or Editing an SMB Share” on page 96 or “Creating or Editing
an NFS Export” on page 97.)
6. Configure the package 1 Name the package.
2 Specify the primary owner (which node will “own” the
package).
3 Assign volume groups to the package.
4 Specify virtual IP addresses for the package.
5 Apply the package configuration.
6 Start the package (if desired).
See “Adding a New Package” on page 86.
7. Activate the package See “Starting a Package” on page 88.
Task... Details...