HP StorageWorks 8000 NAS - Manual (Page 54)

52 Configuring Your System and Network
Setting the Date and Time
The NAS server uses the information on this screen to keep track of the date
and time for operations such as time stamps for file generation and
modification. Failure to set the proper date and time may lead to confusing
behavior or misleading time stamping of files and log messages.
To set the system date and time:
1 In the Command View NAS web interface, click the Configuration tab.
2 Navigate down the tree to System Properties.
3 Click Actions > Edit System Time.
4 Select either:
— System time and choose the date and time information.
— Network Time Protocol (NTP) and choose a server with which the NAS
8000 can synchronize system time.
5 Click OK.
Assigning Contact Information
Some of the Contact Information that you enter appears on the Identity screen
of the Command View NAS web interface. These items are denoted with an
asterisk (*). Network management tools may also function according to the
contents of these fields.
To assign contact information:
1 In the Command View NAS web interface, click the Configuration tab.
2 Navigate down the tree to System Properties.
3 Click Actions > Edit Contact Information.
4 Enter the:
— Name of the person primarily responsible for the NAS server in the
*Contact Name field
— Phone number of the person primarily responsible for the NAS server
in the *Contact Phone Number field
— Pager number of the person primarily responsible for the NAS server
in the Contact Pager Number field
— Email address of the person primarily responsible for the NAS server
in the Contact Email Address field