HP StorageWorks 8000 NAS - Manual (Page 166)

164 Integrating with Network Backup Applications
OmniBack II User Interface for UNIX
Note For a complete discussion on backup over the network, see the
HP OpenView OmniBack II Administrator's Guide .
Before you can backup with OmniBack II, you must:
■ Mount on your local host machine the NAS server volumes you want to
back up.
■ Configure the NAS server so that the UNIX backup system is set to a
trusted host on the NAS server.
To back up files from the NAS server using OmniBack II for UNIX:
1 Open a HP terminal window and type xomni, then press Return to start
OmniBack II.
2 Click the Backup icon.
3 Select Actions > Interactive Backup.
4 A job editor appears. Select Object > Add > File System to add an object
to back up. You must choose File System to access the NAS server.
5 In the Backup File System window:
a Select Hostname (the local backup host).
b Enter a Mountpoint (the mountpoint for the NAS volume).
c Enter a description.
d Select Browse, then highlight the device to back up.
e Click Backup Device, select a device, then click OK.
6 Select the files or volumes you want to back up.
7 Select your backup options as you normally would, then start the backup.