HP StorageWorks 8000 NAS - Manual (Page 52)

50 Configuring Your System and Network
4 In the Current Password field:
— If you are assigning a password for the first time or if you removed
your password, leave this field blank.
— If you are changing or removing the administrative password, enter
the current password in this field.
5 In the New Password field:
— If you are assigning a password for the first time or changing your
password, enter a password in this field. Use any combination of
printable characters (ASCII codes 32 through 126) with the exception
of \,/, |, !, %, ` (back quote), ' (single quote), and ".
— If you are removing the administrative password, leave this field blank.
6 In the Password Confirmation field:
— If you are assigning a password for the first time or changing your
password, confirm the new password by typing it in this field.
— If you are removing the administrative password, leave this field blank.
7 Click OK.
8 The next time you access Command View NAS, enter the name “admin”
and use the password you created.
Caution If you remove or neglect to assign an administrative password,
the Command View NAS web interface will be accessible to
anyone who knows its IP address.