HP Array Controller HSG V8.7 Software - Manual (Page 178)

Assembling an UltraSCSI RAID Subsystem
B–6 UltraSCSI RAID Enclosure
Table B–1 describes the mechanical procedures for installing array
controllers and cache modules. Following installation, configure the
subsystem using procedures contained in the following publications:
• Array controller documentation
• Operating system-specific release notes
Note
For single array controller and cache set configurations,
Controller A must be configured with Cache A or
Controller B must be configured with Cache B.
Table B–1 Installing Array Controllers and Cache
Modules
1. Align the array controller
with the Controller A slot
(C
ALLOUT 3) in the
enclosure.
17
11
CXO5813B
19 20 21 22 23 24
13 14 15 16 18
7 8 9 10 12
1 2 3 4 5 6
A B
4A
3A
2A
1A
3B
2B
1B
4B Shelf 4
Shelf 3
Shelf 2
Shelf 1
1 2
3
Controller A
Cache A
4