HP Array Controller HSG V8.7 Software - Manual (Page 144)

Power Distribution
6–18 UltraSCSI RAID Enclosure
4. Disconnect the ac power cord (C ALLOUT 4) from the ac input box
(C ALLOUT 1).
5. Loosen the two retaining screws (C ALLOUT 2) and remove the ac
input box (C ALLOUT 1).
6. Place the ac input box into an electrostatic bag.
Table 6–6 Installing an AC Input Box
1. Verify that the ac input box
being installed is a model
DS–BA35X–HE.
2. On the ac input box being
installed, press O on the ac
power switch (C
ALLOUT 1).
Table 6–5 Removing an AC Input Box (Continued)
1
0
1
0
1
2
3
4
CXO5186B
1
0
CXO5488B
2
1