HP ProLiant DL170e G6 Server - Manual (Page 9)

Introduction 9
Item Description
5 Power (green) LED
6 Fault (red) LED
7 PDM1 for HP Intelligent Modular PDU Extension Bar
8
PDM2 for HP Intelligent Modular PDU Extension Bar
9 SL-APM Distribution Module ports (see Caution below)
10 Network interface 100mb activity (amber) LED, indicates that the link is in 100Base-T mode and blinks
when transmitting or receiving data. When the link is 10mb, the LED does not illuminate.
11 Network interface connection (green) LED, indicates that the Ethernet link is established
12 Distribution Module port connection (green) LED, indicates that SL-APM Distribution Module is connected
to the port
13 Distribution Module port activity (green) LED, indicates that there is activity between the SL-APM and the
SL-APM Distribution Module
CAUTION: Do not connect the SL-APM Distribution Module port (item 9) to an Ethernet hub or
switch.
NOTE: HP recommends configuring the SL-APM so that it controls only one rack.
SL-APM has eight distribution module ports on the front of the unit. Each distribution module port, in turn,
connects to a port on a SL-APM Distribution Module, which has up to 10 connections to SL Scalable System
enclosures.
You can insert a SL-APM controller into either available slot.
SL-APM rear view
Item Description
1
AC power input 1
2 AC power input 2