HP ProLiant DL170e G6 Server - Manual (Page 88)

CLI commands 88
Show SNMP
• Command:
SHOW SNMP
• Description:
Displays all parameters related to SNMP including whether SNMP is enabled, read-only and read-write
community strings, SNMP trap destinations, and the contact, name, and location settings.
Set SNMP RO
• Command:
SET SNMP RO ""
• Description:
Sets the SNMP read-only public string to the string specified as a parameter.
Set SNMP RW
• Command:
SET SNMP RW ""
• Description:
Sets the read-write string.
Set SNMP contact
• Command:
SET SNMP CONTACT ""
• Description:
Sets the MIB II sysContact field.
Set SNMP location
• Command:
SET SNMP LOCATION ""
• Description:
Sets the MIB II sysLocation field.
Set SNMP trapdest
• Command:
SET SNMP TRAPDEST <|NONE>
• Description: