HP ProLiant DL170e G6 Server - Manual (Page 29)

Command Line Interface 29
7 : Compute node (active)
8 : Compute node (active)
Power supply slot 1 is occupied, status good
Power supply slot 2 is occupied, status good
Power supply slot 3 is occupied, status good
Power supply slot 4 is empty
Fan slot 1 status good
Fan slot 2 status good
Fan slot 3 status good
Fan slot 4 status good
Fan slot 5 status good
Fan slot 6 status good
Fan slot 7 status good
Fan slot 8 status good
To show a particular rack, enter SHOW RACK, followed by either the SL-APM port or both the SL-APM and
SL-APM Distribution Module ports.
For example, enter:
SHOW RACK 2 4
The following example uses the power distribution module:
> show rack pdm
9: [PDM1] PDM Extension
UID : off
Model : Monitored PDU Ext. Bar
Serial Number: 2CJ9410002
Part Number : AF529A
Firmware Rev : 0.35
Hardware Rev : HW_PV2
Switched Outlets:
1:
UID : off
Enabled: yes
Wattage: 092
2:
UID : off
Enabled: yes
Wattage: 139
3:
UID : off
Enabled: yes
Wattage: 011
4:
UID : off
Enabled: yes
Wattage: 219
5:
UID : off
Enabled: yes
Wattage: 050
10: [PDM2] HP 60A PDU
Model : STI Serial TrueRMS PDU
Serial Number: ADFV0000083
Asset Tag : SCI Lab PDU
Part Number : QL192A
Firmware Rev : 1.0a
Switched Outlets:
1: enabled