HP ProLiant DL170e G6 Server - Manual (Page 8)

Introduction 8
Introduction
SL-APM overview
SL-APM is a point of contact for HP ProLiant Scalable System administration.
SL-APM enables:
• Discovery of server rack components by topology
• Node-level power monitoring and control
• Easy node and identification through UID indicators
• Support of logging through standard syslog servers
• The power capping feature for chassis and rack levels:
o SL-APM must have version 1.30 or higher.
o For HP ProLiant SL s6500 Chassis only, SL Chassis Firmware must have version 4.30 or higher.
o SL-APM is not supported for HP ProLiant DL1000, DL2000, and SL6000 Chassis.
NOTE: The use of the term server represents nodes, server trays, server nodes, and cartridges.
SL-APM front view
Item Description
1 SL-APM controller slot 1
2 SL-APM controller slot 2
3 10/100 network interface
4 Serial console