HP ProLiant DL170e G6 Server - Manual (Page 61)

General commands 61
refers to the SL-APM Distribution Module port.
Performing a reset
To reset, enter RESET. Unsaved configuration settings are lost.
Clearing the screen
To clear the session screen, CLEAR SCREEN.
Resetting factory settings
To reset the factory settings, enter RESET FACTORY.
All configuration and password settings will be lost. Password access will be disabled. Network access will
be prevented due to disabled password.
Exiting, logging out, or quitting SL-APM
To exit enter one of the following: EXIT, LOGOUT, enter QUIT.