HP ProLiant DL170e G6 Server - Manual (Page 77)

CLI commands 77
Same as RESET.
Reboot CM
• Command:
REBOOT CM
where:
refers to the SL-APM port.
refers to the SL-APM Distribution Module port.
• Description:
Reboots the HP Moonshot 1500 Chassis CM module.
Reset factory
WARNING: When you enter RESET FACTORY, SL-APM erases your entire configuration. Before
resetting factory defaults, consider saving your configuration. For more information on
duplicating your configuration, see "Duplicating the configuration (on page 26 )".
• Command:
RESET FACTORY
• Description:
Restores SL-APM to factory settings (including no password and Ethernet disabled) and then reboots
SL-APM.
Save
• Command:
SAVE
• Description:
Saves the current configuration to non-volatile memory.
Save config
• Command:
SAVE CONFIG
• Description:
Functionality identical to the SAVE command.
Set IP
• Command:
SET IP {DHCP | }