HP Matrix Operating Environment Software - Manual (Page 96)

Table 18 LSMUTIL options (continued)
Description Parameters Option
Preallocate the specified WWN or preallocate initiator WWNs
for a specified Virtual Connect Domain Group. Displays the
reserved WWNs to standard output in ASCII format. You must
specify a Virtual Connect Domain Group name and an integer
from 1 to 100 if you enter a DomainGroupName. Either of the
following formats is acceptable:
•
-reserve –wwn 08:03:24:34:AE:89:21:99
•
-reserve –wwn DomainGroupName 32
If you specify more than just lsmutil –reserve –wwn, you
must specify either the DomainGroupName and the number of
WWNs to reserve, or the single WWN to reserve.
If only the -wwn parameter is supplied with the reserve option,
the available domain groups are displayed.
-wwn [WWN| DomainGroupName
NumberofWWNs] –help -reserve
Deallocates the WWNs listed in the comma or semicolon
separated list. WWNsToUnreserve -unreserve
Displays the current version of Insight Dynamics and also the
version of the logical server tables in the Insight Dynamics
database to standard output. These version numbers may match
or may not match. -version
LSMUTIL example
C:\>lsmutil -list -ls
Logical Server List on host labmachine at 2011-01-17 10:05:46
Server Name Type Arch State
VCDG Storage WWN
testls_esx_inactive ESX ProLnt NEW
testls_esx_nosan ESX ProLnt NEW
testls_hyperv_active HyperV ProLnt ACTIVE
testls_hyperv_inactive HyperV ProLnt INACTIVE
testls_vc_active VCBlade ProLnt ACTIVE
Cup1 50:06:0B:00:05:00:00:44 50:06:0B:00:05:00:00:46
testls_vc_inactive VCBlade ProLnt NEW
Cup1 50:06:0B:00:05:00:00:3E
Using LSMUTIL with logical server storage
The LSMUTIL command line interface can be used to:
•
Modify storage information to create multiple storage pool entries without using the logical
server storage screens in Virtualization Manager (see
“Creating multiple storage pool entries”
(page 98) )
•
Facilitate communication between the server administrator who defines storage pool entries,
and the storage administrator who creates, presents, and zones storage (see
“Easing
communication between server and storage administrators” (page 97) )
•
Request initiator WWNs for storage preallocation “Requesting server (initiator) WWNs for
storage preallocation” (page 100) )
•
Modify server information to include details about local disks (see “Modifying physical servers
with local disk information” (page 103) )
96 LSMUTIL database utility