HP Matrix Operating Environment Software - Manual (Page 126)

utilization data is available, power meters are provided for any physical server, including
standalone servers, nPartitions, or server blades. Power meters typically display a warning
triangle until a power calibration has been performed for a system. Once calibrated using
either of the above methods, the power meter value can be displayed.
Meter callout information
Meter callouts exist only on the Visualization tab. Meter callout information includes:
•
Current utilization data for CPU, memory, network, and disk; plus the ability to view historical
data, for example, by linking to Capacity Advisor to display a profile page.
•
Information about power consumption for any physical server, including standalone servers,
nPartitions, or server blades.
•
Collection interval; which is typically in 5 minute intervals for WBEM/VMM data, but can
vary for agentless data collection.
•
Source of the meter data, indicating whether the data comes from the utilization WBEM
provider, VMM, or via agentless data collection.
•
Last-updated time of the data collection.
•
Error messages (for example, if there was a problem collecting utilization data from the server),
a suggested resolution, and an optional Retry link.
The following figure shows meter callout information for a server blade running on HP-UX.
If the compartment shows a managed workload, links appear that let you view real time and
historical information from the Global Workload Manager (gWLM). For example:
126 Advanced features