HP Matrix Operating Environment Software - Manual (Page 65)

command, except for the IP address (–a option). Note that each addgroupmember command
specifies a different IP address.
A logical load balancer group should have at least two members.
C:\> ioexec addgroupmember logicalloadbalancer -s example-io-service
-l LogicalLoadBalancer:00000000-0000-0000-0000-000000000000 -g http-group
-a 192.168.200.10 -p 8080 -u administrator
C:\> ioexec addgroupmember logicalloadbalancer -s example-io-service
-l LogicalLoadBalancer:00000000-0000-0000-0000-000000000000 -g http-group
-a 192.168.200.20 -p 8080 -u administrator
Following is an example of removing a logical load balancer from a group.
C:\> ioexec removegroupmember logicalloadbalancer -s example-io-service
-l LogicalLoadBalancer:00000000-0000-0000-0000-000000000000 -g http-group
-a 192.168.200.10 -u administrator
NOTE: For information about how IPv6 support affects a load balancer, see “IPv6 and load
balancer” (page 61) .
Viewing details of a load balancer
Details of a load balancer associated with a service are shown on the Services tab of the
infrastructure orchestration console, self service portal, and organization administrator portal.
Select a service and click Details, then select the Load Balance tab.
Configuring a load balancer 65