Brother NC-2010p - Manual (Page 90)

CHAPTER 9 BANYAN VINES NETWORK CONFIGURATION
9-3
B. File Server Queue Configuration
You must now configure the queue(s) on the Banyan VINES file servers.
Print queues are one of several different types of services that are available
on a VINES file server. To configure a print queue, use the
MANAGE utility
as follows:
1. From the main menu, select 1 - Services and press ENTER.
2. You will get the Manage Services menu. Select ADD a server-based
service and press ENTER.
3. From the Add A Service screen type the desired StreetTalk name for
the print queue, press ENTER, and then type in a description of the
print server followed by ENTER.
4. Select the desired file server (if there is more than one) and press
ENTER.
5. When you get the Select Type Of Service screen, select 3 - VINES
print service (for VINES 5.xx) or 2 - Banyan Print Service (for
VINES 6.xx) and press ENTER.
6. Use the arrow keys to select the disk where the print queue service
will reside and press ENTER.
7. You will get the message "The service is running but not yet available
to users." Press F10.
8. If desired, type in the maximum number of jobs and maximum size of
job for the queue when you get the Configure Queue screen.
Otherwise press F10 for unlimited number and size.
9. If desired, choose a default paper format when you get the Configure
Paper Formats screen. Otherwise, press F10 to select the defaults.
10. If desired, enter the user names that are authorized to use the printer
when you get the Access Lists screen. Otherwise, press F10 to accept
the defaults.
11. If you have a VINES 5.xx system, you may optionally enter the users
to be notified in the event off printer problems when you get the Alert
list screen. Otherwise, press F10 to accept the defaults (not applicable
for VINES 6.xx).
12. When you get the Add A Destination screen, use the arrow keys to
select PCPrint and press ENTER.