Changing the domain name using telnet or brconfig – Brother NC-2010p User Manual
Page 65

CHAPTER 5 NetBIOS CONFIGURATION (NetBEUI and TCP/IP)
5–3
Changing the domain name using TELNET or BRCONFIG
If you are unable to use a BRAdmin utility or a web browser, you can use
TELNET or the BRCONFIG Remote console program (BRCONFIG
requires the IPX/SPX protocol to be installed on your PC).
When you are connected to the print server, enter the default password
“access” in response to the "#" prompt. Type in anything in response to the
"Enter Username>" prompt, you will then be at the "Local>" prompt.
Now enter the command:
SET NETBIOS DOMAIN domainname
EXIT
✒ Note
If you are using SMB on NetBEUI with old firmware and the old
NetBEUI port Monitor,
Use: SET NETBEUI DOMAIN domainname
where domainname is the name of the domain or workgroup that you are
on. If you are not sure what your domain name or workgroup name is look
in the Identification tab in your Windows 95/98/NT 4.0 network applet.
- FAX-575 (114 pages)
- FAX-575 (1 page)
- FAX-T104 (1 page)
- FAX-T104 (119 pages)
- MFC-3340CN (173 pages)
- MFC-3340CN (71 pages)
- MFC-3340CN (231 pages)
- FAX-1940CN (231 pages)
- FAX-1940CN (18 pages)
- MFC-3340CN (44 pages)
- FAX 1920CN (66 pages)
- FAX 1920CN (17 pages)
- FAX 1920CN (214 pages)
- FAX 1920CN (103 pages)
- MFC8840D (36 pages)
- FAX-3800 (148 pages)
- 660MC (115 pages)
- IntelliFax-680 (76 pages)
- LF1613001 (1 page)
- FAX-3800 (1 page)
- FAX-3800 (26 pages)
- MFC7160C (275 pages)
- FAX-T86 (2 pages)
- FAX-236 (97 pages)
- 3240C (192 pages)
- Facsimile Equipment DCP7010 (327 pages)
- MFC4550 PLUS (206 pages)
- FAX-2840 (86 pages)
- FAX-2840 (15 pages)
- FAX-2840 (140 pages)
- FAX-2840 (72 pages)
- FAX-2840 (20 pages)
- FAX-717 (125 pages)
- FAX-236S (1 page)
- FAX-1030Plus (204 pages)
- FAX-60 (36 pages)
- FAX-920 (150 pages)
- FAX 4750 (183 pages)
- FAX 770 (165 pages)
- FAX-817 (130 pages)
- FAX-202 (99 pages)
- FAX-565 (148 pages)
- FAX-565 (1 page)
- FAX-565 (119 pages)
- MFC 4600 (136 pages)