Brother NC-2010p - Manual (Page 13)

USER’S GUIDE
1-2
Creating a Print Queue Using BRAdmin or BRAdmin32
Brothers BRAdmin utilities are Windows-based applications that provide
similar functionality to the Netware PCONSOLE utility (or the NWADMIN
utility in Netware 4.1x). To use the BRAdmin programs to configure a
Brother print server under NetWare, make sure that you are logged in as
SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.1x) and
perform the following steps:
Alternatively, Brother print servers can be configured with the NetWare
PCONSOLE or NWADMIN utilities in conjunction with Brothers DOS
BRCONFIG utility.
Installing the BRAdmin software
✒ Note
The BRAdmin32 application will not run on Windows 3.x systems.
1. Insert the “Print Server Configuration Utility for Windows 3.1” diskette
into your disk drive.
2. Choose Run from the File menu in the Program Manager.
3. Type the drive name where you inserted the supplied disk and “SETUP”
in the box: for example, A:\SETUP . Choose the OK button or press the
Enter key.
4. The installer starts running. Follow the instruction on the computer
screen.
1. Insert the “Print Server Configuration Utility BRAdmin32” diskette into
your disk drive.
2. Click the Start button and choose Run.
3. Type A:\SETUP . Choose the OK button or press the Enter key.
4. The installer will now start.