Brother NC-2010p - Manual (Page 22)

CHAPTER 1 NOVELL NETWARE CONFIGURATION
1-11
5. Return to the main Available Options menu by pressing ESCAPE.
6. Select Print Queues.
7. Press INSERT type in the desired print queue name (you will also be
asked for a volume name. Press INSERT and select the appropriate
volume), and press ESCAPE to return to the main menu.
8. Make sure that the new queue name is highlighted, and press ENTER.
9. Select Print Servers and press ENTER to specify which network
print servers can print jobs from this print queue. The list will be
empty, since none have been selected.
10. Press INSERT to get a list of the queue server candidates and select
the Netware print server name from step 4, which will then be added
to the list. Press ENTER.
11. Select Printers from the Available Options menu.
12. Press INSERT and enter a descriptive name for the printer.
13. Press ESCAPE and go back to the Available Options menu.
14. Select Print Servers and select the name of the printer server that you
entered in Step 4.
15. Highlight the Printers option in the Print Server Information menu.
16. Press INSERT and select the name of the printers you entered in Step.
17. Press ESCAPE several times to return to DOS.
18. Insert the Brother Print Server Configuration Utility diskette in Drive
A: of your PC and type: A:BRCONFIG.
Select the print server from the list of print servers. When you get the
message that the print server is connected, press the ENTER key and
type the default password of “access” in response to the “#” prompt
(the password will not echo), and then press the ENTER key again in
response to the ENTER
Username> prompt. When you get the
Local> prompt, type:
SET SERVICE service TREE tree
SET SERVICE service CONTEXT Context