Brother NC-2010p - Manual (Page 127)

APPENDIX
A-7
SET SERVIce TCP nn
SET TCP port number (>1023) on service
SHow IP
Shows LPD/TCP/TELNET Parameters
SHow IP ACcess
Shows IP addresses that are allows to access print server
SET IP Method [AUTO|STATIC|DHCP|BOOTP]
Set method of getting IP address
NetWare Commands
CLear NETWare SErver server
Removes specified NetWare file server from Brother print servers access list.
SET NETWare ADvertise n
Sets advertising frequency of print server
SET NETWare [EN|DIS]
Enables/Disables Netware protocol on print server
SET NETWare FRame [802.2|802.3|ETH|AL|AU|SNA]
Sets Netware frame type to 802.2, 802.3, Ethernet II, ALL, AUTO, or
SNAP
SET NETWare Network n
Set Netware internal network number
SET NETWare NPrinter n ON
Set NPrinter mode on service
SET NETWare PAssword
Sets print server login password for file server
SET NETWare POlling n
Sets queue polling time in seconds
SET NETWare QServer ON
Sets Queue Server mode on service
CLear NETWAre Qserver ON
Clear Netware Queue server mode on service
SET NETWare REscan
Rescans file servers for new queues
SET NETWare SErver [EN|DIS]
Enables file server
SET SERVIce NETW [EN|DIS]
Enables or disables NetWare jobs on specified service
SHow NETWare
Shows NetWare parameters
SHow SERVIce NDS
Show NDS parameters
SET SERVIce TREE
Sets NDS tree on service
SET SERVIce CONtext
Sets NDS context on service