beautypg.com

Configuration server, Configuration server 3-12 – Brother NC-2010p User Manual

Page 55

background image

USER’S GUIDE

3-12

Configuration Server

1. From the OS/2 desktop open the Templates folder. Use the right mouse

button to drag the Printer icon (not the Network Printer icon) onto the
desktop.

2. The Create a Printer window should be open (if it is not, double click

on the printer icon).

- Type in any name for the printer.

- Select the default printer driver. If the desired printer driver is not listed,

click on the Install new Printer Driver button and add the driver.

- Choose the output port. IBM TCP/IP automatically creates 8 named pipes

called

\PIPE\LPD0

through to

\PIPE\LPD7

. Pick an unused port and

double click on it.

Note
Early versions of Warp Server have a bug in which the named pipes do
not appear (the problem does not affect Warp Connect or LAN Server).
This problem is fixed via a patch available from IBM.

You will get the Settings window. Enter the following:

LPD server

The Brother print server name (from the

HOSTS file)

or its IP address.

LPD printer

For most applications, use the Brother print
server 'binary' service

BINARY_P1.

However, if you are printing text files from
the DOS or OS/2 command prompt, you
should use the text service

TEXT_P1

,

which will add carriage returns for proper
formatting of the data (but will potentially
distort graphics printouts).

Host name

The IP name of the OS/2 file server

User

The IP address of the OS/2 file server

You may leave the other entries blank. Click on the OK button. The pipe
should be highlighted; if not click on it.

Click on the Create button to create the printer.

3. Open the LAN Services folder and execute the LAN Requester

program: