Milestone XProtect Advanced VMS 2014 - Manual (Page 285)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com 285 System maintenance
If all involved servers (both the management server and the trusted servers or the required
XProtect Enterprise) are on your local network, you can simply specify the LAN address. If one
or more involved servers access the system through an internet connection, you must also
specify the WAN address.
3. Click OK.
Registered services properties
In the Add Registered Service or Edit Registered Service window, specify the following:
Component Requirement
Type Prefilled field.
Name
Name of the registered service. The name is only used for display
purposes in the Management Client.
URLs
Click Add to add the IP address or hostname of the registered
service. If specifying a hostname as part of a URL, the host must
exist and be available on the network. URLs must begin with http://
or https:// and must not contain any of the following characters: < >
& ' " * ? | [ ] ".
Example of a typical URL format: http://ipaddress:port/directory
(where port and directory are optional). Note that you can add more
than one URL if required.
Trusted
Select if the registered service should be trusted immediately (this
is often the case, but the option gives you the flexibility to add the
registered service and then mark it as trusted by editing the
registered service later).
Note that changing the trusted state also changes the state of other
registered services sharing one or more of the URLs defined for the
relevant registered service.
Description
Description of the registered service. The description is only used
for display purposes in the Management Client.
Advanced
When a service is advanced, it has specific URI schemes (for
example, http, https, tcp or udp) that need to be set up for each host
address you define. A host address therefore has multiple
endpoints, each with its own scheme, host address and IP port for
that scheme.