Milestone XProtect Advanced VMS 2014 - Manual (Page 198)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com 198 Management Client elements
Name Description
Read
The selected output(s) will be visible in the clients. If visible, the
output will be selectable on a list in the clients.
Activate
The selected output(s) can be activated from the Management
Client and the clients. Specify the time profile or leave the default
value.
PTZ tab (roles)
You set up rights for pan-tilt-zoom (PTZ) cameras on the PTZ tab. You can specify the features
users/groups can use in the clients. You can select individual PTZ cameras or device groups
containing PTZ cameras.
Specify the following rights for PTZ:
Name Description
PTZ Control
Determines if the selected role can use PTZ features on the
selected camera. Specify the time profile or leave the default value.
Activate PTZ preset
Determines if the selected role can move the selected PTZ cameras
to preset positions. Specify the time profile or leave the default
value.
PTZ Priority
Determines the priority of PTZ cameras. When several users on a
surveillance system want to control the same PTZ camera at the
same time, conflicts may occur.
You can avoid such a situation by specifying a priority for use of the
selected PTZ camera(s) by users/groups with the selected role.
Specify a priority from 1 to 32,000, where 1 is the lowest priority.
The default priority is 3,000. The role with the highest priority
number is the one who can control the PTZ camera(s).
Speech tab (roles)
Relevant only if you use speakers on your system. Specify the following rights for speakers:
Name Description
Speak
Determine if users should be allowed to talk through the selected
speaker(s). Specify the time profile or leave the default value.