Milestone XProtect Advanced VMS 2014 - Manual (Page 150)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com 150 Management Client elements
Default rule Description
Start Metadata Feed
Ensures that data feeds from all connected cameras are
automatically fed to the system.
While the default rule enables access to connected cameras' data
feeds immediately upon installing the system, it does not guarantee
that data is recorded, as cameras' recording settings must be
specified separately.
Show Access Request
Notification
Ensures that all access control events categorized as 'Access
Request', will cause an access request notification to pop up in
XProtect Smart Client, unless the notification function is disabled in
the Smart Client profile.
Recreate default rules
If you accidentally delete any of the default rules, you can recreate them by typing the following
content:
Default rule Text to type
Goto preset when PTZ is done
Perform an action on PTZ Manual Session Stopped from All
Cameras
Move immediately to default preset on the device on which event
occurred
Record on Bookmark
Perform an action on Bookmark Reference Requested from All
Cameras, All Microphones, All Speakers start recording three
seconds before on the device on which event occurred
Perform action 30 seconds after stop recording immediately
Record on Motion
Perform an action on Motion Started from All Cameras start
recording three seconds before on the device on which event
occurred
Perform stop action on Motion Stopped from All Cameras stop
recording three seconds after
Record on Request
Perform an action on Request Start Recording from External start
recording immediately on the devices from metadata
Perform stop action on Request Stop Recording from External stop
recording immediately
Start Audio Feed
Perform an action in a time interval always start feed on All
Microphones, All Speakers
Perform an action when time interval ends stop feed immediately
Start Feed
Perform an action in a time interval always start feed on All
Cameras
Perform an action when time interval ends stop feed immediately