Thermo Fisher Scientific CyberScan pH 10/pH 100 - Manual (Page 64)

60
17 ADDENDUM 1: FACTORY DEFAULT SETTINGS (pH 100 ONLY)
PROGRAM FUNCTION ACTIVE KEYS OPTIONS DEFAULT
SETTING
P 1.0 Memory Clear MI/ ! ; MR/ " ON ; OFF OFF
P 1.1 Reset MI/ ! ; MR/ " ON ; OFF OFF
P 2.0 Electrode Offset - Viewing Only 0.0 mV
P 2.1 Electrode Slope - Viewing Only 100.0
P 2.2 pH Calibration Buffer
Data Display MI/ ! ; MR/ " 1.68; 4.01; 7.00;
10.01; 12.45 (Viewing
only) “ ——” No
calibration
performed.
P 2.3 Last pH Calibration
Temperature - Viewing Only 25.0 C
P 2.4 Relative mV Offset - Viewing Only 0.00 mV
P 3.0 Resolution - [pH] mode MI/ ! ; MR/ " 0.1 ; 0.01 0.01
P 3.1 READY Selection MI/ ! ; MR/ " ON; OFF ON
P 3.2 Auto Shut-Off MI/ ! ; MR/ " ON; OFF ON
P 4.0 Baud Rate MI/ ! ; MR/ " 2.4; 4.8; 9.6; 19.2
(Kbps) 9.6 Kbps
P 4.1 Parity MI/ ! ; MR/ " 0,1,2 (none, odd,
even) 2 (even)
P 4.2 Stop Bit MI/ ! ; MR/ " 1,2 1
NOTE: The CON key is always active. It is used to confirm all program functions selected.