beautypg.com

Program 4 – communication setup, P4.0: baud rate, Das for ph 100 only) 36 – Thermo Fisher Scientific CyberScan pH 10/pH 100 User Manual

Page 38

background image

34

9.4

Program 4 – Communication Setup

This program allows you to set up the instrument’s

communication parameters of the CyberScan 100 to

enable proper communication with the printer or

computer of choice.

9.4.1

P4.0: Baud Rate

You can select a baud rate either at 2.4, 4.8, 9.6 or 19.2

Kbps. Under default conditions, the baud rate is set to 9.6

Kbps.

1.

From pH or mV measurement mode, press SETUP

key.

2.

Press CON key (10 times) until P4.0.

3. Use

MI/

!

or MR/

"

key to change different baud

rate.

4.

Press CON key to confirm and continue to set Parity

in P4.1.

See Figure 36.

NOTE:

To exit without confirming baud rate value, press

CAL/MEAS key. This will bring you back to the

measurement mode.

Figure 36: P4.0 Setting Baud

Rate

See also other documents in the category Thermo Fisher Scientific Tools: