Thermo Fisher Scientific CyberScan pH 10/pH 100 - Manual (Page 6)

2
2 DISPLAY AND KEYPAD FUNCTIONS
2.1 Display
The LCD has a primary and secondary display.
•
The primary display shows the measured pH or ORP values.
•
The secondary display shows the measured temperature.
The display also shows error messages, keypad functions and program functions.
Figure 1: Full LCD Screen
1. SETup mode indicator 9. pH buffer selection indicator 16. ON & OFF indicator
2. MEASurement mode indicator 10. Temperature indicator 17. Low battery indicator
3. CALibration indicator 11. Automatic Temperature
Compensation indicator
18. Probe indicator
4. CONfirm indicator 12. mV measurement mode
indicator
19. Buffer indicator
5. MEMory recall mode indicator
(For pH 100 only)
13. Rel mV measurement mode
indicator (For pH 100 only)
20. ERRor indicator
6. pH indicator 14. Temperature measurement
mode indicator
21. Printer indicator (For pH 100
only)
7. Relative mV indicator (For pH
100 only)
22. HOLD indicator
8. mV indicator
15. pH measurement mode
indicator
23. READY indicator