beautypg.com

P2.3: calibration temperature, P2.4: relative mv offset value – Thermo Fisher Scientific CyberScan pH 10/pH 100 User Manual

Page 35

background image

31

9.2.4

P2.3: Calibration Temperature

Indicates the temperature of the last calibration

performed. This is a View Only mode.

Default setting is 25 degrees C.

See Figure 31.

9.2.5

P2.4: Relative mV offset value

The primary display indicates the Relative mV base

value in mV. This base value is based on your pre-

selected value during calibration for REL mV

measurement. If REL mV has not been calibrated or

under default conditions, the primary display reads 0

mV.

Figure 31: Temperature of the last

calibration performed

Figure 32: Relative mV base value