SHIMPO DT-601CG - Manual (Page 38)

Mode# Setting of the "Analog Output" AV3-5/AI exclusive use
1 0 Need set it on the AV3-5/A1 option
A B C D E F
1 0. 0 0 0 0
Analog Output
0 : Synchronizing with indicated value
1 : Synchronizing with measurement
Output Digits Selection
0 : Right 4 digits (CDEF)
1 : Center 4 digits (BCDE)
2 : Left 4 digits (ABCD)
Reverse Output Selection
0 : Standard (0-10V, 0-5V, 1-5V, 4-20mA)
1 : Reverse (10-0V, 5-0V, 5-1V, 20-4mA)
Analog Output Display Selection
0 : Display1
1 : Display2
Select of the Analog Output Display
Select analog output display1 or analog output display2.
Select of the Reverse Output
Analog output is reversed.
Select of the Output Digits
Analog Output
0 : Synchronizing with indicated value
Analog output to indicated value
1 : Synchronizing with measurement
Analog output to result of internal arithmetic
Right 4 digits
Center 4 digits
Left 4 digits
P36,37