SHIMPO DT-601CG - Manual (Page 32)

Mode# Output alarm: setting of output alarm 3 (OUT1-4)
0 7 A B C D E F
0 7. 1 3 1 3
OUT 2&4 Duration of 1shot output
0 : 10 ms 5 : 250 ms
1 : 20 ms 6 : 500 ms
2 : 50 ms 7 : 750 ms
3 : 100 ms 8 : 1 sec
4 : 200 ms 9 : 2 sec
Output 2&4's LED flashing might not be visible when 10ms
is chosen although
Out 2&4 Output mode
0 : sequence output
1 : 1shot output
OUT 1&3 Duration of 1shot output
0 : 10 ms 5 : 250 ms
1 : 20 ms 6 : 500 ms
2 : 50 ms 7 : 750 ms
3 : 100 ms 8 : 1 sec
4 : 200 ms 9 : 2 sec
Output 1&3's LED flashing might not be visible when 10ms
is chosen although
Out 1&3 Output mode
0 : sequence output
1 : 1shot output
[ OUT1&3 or OUT 2&4 output mode]
Sequence : Output will be activated when the conditions are met.
If it is beyound tolerance (condition), output will be OFF.
1 shot : 1 shot of pulse with set duration will be output when output conditions are met.
[ OUT 1&3 or OUT 2&4 duration of 1shot output]
Set the duration of 1shot output. (output margin is ±2ms)
P30