SHIMPO PT-110 - Manual

z
The Shimpo Model PT-110 Non-Contact Laser Tachometer is a
simple to use, ergonomic, rugged test instrument that operates
with optical laser technology. This velocity analyzing and mea-
suring device is ideal for rotational machine inspection and pro-
cess speed analysis. The PT-110 possesses a large backlit LCD
screen that provides clear viewing in any environment. Users can
obtain results in either Hertz or RPM, as well as Total counts with
the simple selection switch. During testing, the unit automatically
saves maximum, minimum, last recorded values and up to 96
logged data readings. The compact, lightweight PT-110 Tachom-
eter comes standard with reflective tape, 3 AAA batteries and pro-
tective carrying case.
PT-110 Non-Contact Tachometer
Operation Manual SHIMPO INSTRUMENTS
To Avoid Injury, do not point the light beam of the in-
strument or have it reflected into the eyes of people
or animals.
Do not leave the device close to water or any other
liquid to avoid damage.
If not using this instrument for extended periods of
time, remove the batteries to prevent potential battery
leakage from causing product damage.
Do not attempt to open housing or do maintenance.
Damage to laser may occur.
SPECIFICATIONS
Range: 2.5~99999 RPM; 0.05 ~ 1666 Hz; 1 ~ 99999 Count
Resolution: 0.1 RPM (2.5 ~ 999.9 RPM); 1 RPM (above 1000
RPM); 0.01 Hz (0.05 ~ 99.99 Hz); 0.1 Hz (above 100 Hz)
Display: 5 digit, 0.7” (18 mm) LCD
Accuracy: +/-0.05% of Reading +/-1 LSD
Sampling Time: 0.8 second (over 60 RPM)
Detection: Laser
Measuring Distance: 2-20” (50-500 mm)
Memory: Automatically stores Maximum (UP), Minimum (dn), last
value (LA) and up to 96 readings for review. Maximum speed for
reading storage is every 0.8 seconds.
Dimensions: 6.1 x 2.8 x 1.4 (155 x 70 x 35 mm)
Power: 3 x 1.5V AAA battery
Enclosure: ABS plastic housing
Product Weight: 0.4 lb (181 g)
Package Weight: 0.9 lb (408 g)
Warranty: 1 Year
Included Accessories: 3 AAA batteries, protective carrying case,
reflective tape.
PRODUCT DIAGRAM
1. Reflective Tape (Included)
2. Light Beam
3. Measurement Button - When pressed Class II Laser is
active.
4. Function Select Switch
5. Memory Button
6. LCD Display
7. Battery Cover (On Back)
8. Laser Symbol Indicates Active Laser
8