KROHNE Summit 8800 Vol 3 - Manual (Page 98)

98 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol3 R02 en
SUMMIT 8800 REPORTING 07
Figure 127 Ethernet port configuration
7 .2 .1 FTP protocol
FTP or File Transfer Protocol is a standard network protocol used to transfer files from one host
to another over a TCP based network. In the Summit FTP is used to transfer reports from the
flow computer to a printer or to a file server.
Figure 128 Ethernet port FTP configuration
Enable Click the box if FTP is used
Printer IP Provide the IP address of the receiving device
Username Set the username needed to access the receiving device.
Password Set the password needed to access the receiving device
For printers a username and password may not be needed, however they must be entered for
access to the user’s network servers.
Note: When using FTP to print data the printer or print server must (be set to) accept FTP con-
nections. A majority of the more modern network enabled printers and print servers support
this protocol.
7 .2 .2 SMTP E-mail protocol
The SMTP or Simple Mail Transfer Protocol is an standard for electronic mail (e-mail) transmis-
sion across IP networks. Two independent SMTP protocols can be used: