KROHNE Summit 8800 Vol 3 - Manual (Page 21)

21 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol3 R02 en
SUMMIT 8800 CONFIGURATOR SOFTWARE 03
3. CONFIGURATOR SOFTWARE
For initial installation of the software refer to Volume 1 of the handbook.
For Hardware and instrumentation, refer to Volume 2 of the handbook
Alter starting the configuration software, the option menu appears:
Figure 3 Configurator option selections
Select Edit Offline, this function allows the user to create or modify a new configuration without
actually being connected to the flow computer.
Figure 4 Application firmware version
Select the correct software version. The software must be compliant to the connected Summit
8800 firmware version, details of system information can be found in volume 1. We assume that
the version mentioned in append 1 is selected.
The main configuration page of the Configurator software is displayed and will be the starting
point for this manual.