KROHNE Summit 8800 Vol 3 - Manual (Page 166)

166 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol3 R02 en
SUMMIT 8800 GENERAL INFORMATION 09
9 .15 Redundancy
Liquid Gas Steam
This page allows a system redundancy function to be enabled.
The default state of the flow computer can be set to be duty or standby, and assumes that a sys-
tem consists of a duty and a standby flow computer that are in communication with each other.
Further details on configuring a redundancy setup is detailed in volume 2
9 .16 Watchdog
Liquid Gas Steam
This function allows a system watchdog to be enabled which will perform a complete system
reset after a defined watchdog time-out period has elapsed if any fault condition occurs.
For details. See volume 2
9 .17 Run-switching
Liquid Gas Steam
Run switching allows automatic opening of new runs/ streams when the flow exceeds a preset
maximum and automatic closing when the flow is below a preset minimum. With this the best
accuracy of a metering station can be guaranteed.
For details, see volume 2
9 .18 SOAP
Liquid Gas Steam
The Soap or Simple object access protocol is used for external servers to access information
from the Summit.
9 .19 Modbus time-out
Liquid Gas Steam
The Modbus time-out function is designed to identify when essential Modbus communications is
lost.