KROHNE Summit 8800 Vol 3 - Manual (Page 159)

159 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol3 R02 en
SUMMIT 8800 GENERAL INFORMATION 09
By pressing the new button, a new step with its associated variable settings can be entered:
Date/ time Set the date and time to start this step
ID/ value For each ID item, drag and drop a variable in the list and give it the
desired value
Check times As an FAT normally does not start at a fixed time or date, it is possible
to ignore checking of the a time element. In this case only the seconds
are checked.
Resume normal operation Define if normal operation should start when the step starts, so if
needed this will normally be at the last step.
Please note that in this case the FAT check uses the flow offset to simulate a flow without the
need for hardware pulses.
Other functions are:
Create a new step Press the new button
Edit a step Select a step and press the edit button
Delete a step Select a step and press the delete button
Create an ID/ value Drag and drop a variable from the ID list
Edit an ID/ value Double click on the ID
Delete an ID/ value Select an ID and press the delete key
9 .9 Security configuration
Liquid Gas Steam
The SUMMIT 8800 can have 3 security modes:
Open Any changes can be made including download of a new application
Partial The existing application can be uploaded, changed and downloaded again.
Full Connection is possible and applications can be uploaded, but cannot be downloaded.
Although an application can be changed in partial mode, there are still security measures to
restrict access. First of all, the user be authorized to use the configurator and secondly an ap-
plication itself can restrict the access to its menu: