GW Instek GSP-827 User Manual - Manual (Page 89)

2.7GHz Spectrum Analyzer Operation Manual
⎯ ⎯
88
Tracking Generator
Operation steps .
(1) Setup the spectrum analyzer. Frequency range, Reference level, …, and so on.
(2) Set the TG level.
(3) Connect the TG output and RF input with the fixture and cables.
(4) Turn the TG output ON
(5) Perform Normalization function by turning the Normal ON.
(6) Set the offset value.
(7) Plug the DUT into the connection. The frequency response is measured accurately.
The operation detail is described in following paragraphs.
DUT