GW Instek GSP-827 User Manual - Manual (Page 70)

2.7GHz Spectrum Analyzer Operation Manual
⎯ ⎯
69
Edit
The Limit Line is edited by mean of defining point by point. Each time a new point is inserted in
the table, the Limit Line is connected to the ahead and followed points immediately. More details
are described in the following paragraphs.
High Limit /Low Limit Selection
Repeating F1 will toggle high limit and low limit to edit.
Limit Line Edit
UP/DOWN and Scroll: To move the cursor to the field to edit.
0 99.5 -45.0 5 100.4 -45.0
1 99.9 -45.0 6 100.5 -45.0
2 99.9 -30.0
3 100.1 -30.0
4 100.1 -45.0
Editing : Enter the frequency (horizontal) or level( vertical) of the point.
1
Start:99.5MHz Stop:100.5MHz
VBW:100 kHz Center:100.0MHz Span:1.0MHz
Ref Lvl: -30.0 dBm
-30.0
-50.0
-70.0
-90.0
-110.0
SAT JAN 28, 2003 14:30:25
INT:REF
AMPL CAL Limit
Lower
Insert
Undo
Delete
Limit Line Edit
0
1 2 3
7
6 5 4
8 9
. -
GHz
dBm
MHz
dBmV
kHz
dBuV
BK SP
Reutrn
Frequency Frequency Level Level
(dBm (dBm (MHz) (MHz)
0: 99.5 -45.0
1: 99.9 -45.0
2: 99.9 -30.0
3: 100.1 -30.0
4: 100.1 -45.0
5: 100.4 -45.0
Level:-45
Limit Line Edit
Limit
High
Limit
Low
6: 100.5 -45.0