GW Instek GSP-827 User Manual - Manual (Page 57)

2.7GHz Spectrum Analyzer Operation Manual
⎯ ⎯
56
Track ON
Track function will dynamically track the Peak signal and move the signal to the center. In fact, it
equal to the combination of Peak Search + Marker to Center which is performed all the time.
Note: Because the marker continuously keeps searching the peak signal and moving it to the
center on the display, therefore the Center Frequency is changeable as long as the track
function is on.
1
Peak Search
Track
ON OFF
Start:99.5MHz
RBW:30 kHz
Stop:100.5MHz
VBW:100 kHz
Center:100.0MHz
Span:1.0MHz
Sweep:100.0ms
Step:1MHz
Ref Lvl: -30.0 dBm
-30.0
-40.0
-50.0
-60.0
-70.0
-80.0
-90.0
-110.0
-100.0
SAT JAN 28, 2003 14:30:25
INT:REF
AMPL CAL
Marker Level Freq(MHz)
To
Peak
Peak
Left
Mkr-
>Cente
r
Peak
Right
Next
Peak
Track
ON OFF